9 AutoCAD Tutors Found Near Columbia, SC



Photo: Cecilia C.

Cecilia C.

AutoCAD Tutor

Charlotte, NC 28210

Will travel 10 miles

$70 per hour.

4.75 4 ratings

View Cecilia C.

Experience Architect and Professor

I use AutoCAD 2015 on a daily basis in my part time job. I work at RAM Design, in Sunrise. What I do there is to draft all their projects (residential and commercial creating a full set of construction documents in AutoCAD). I am an architect with a Master in Architecture degree from Oklahoma State University. I have more than 25 years experience practicing architecture in different countries. I have taught design and graphics for 12 years in three different Universities: 5 years at Universidad Jose Antonio Paez in Valencia-Venezuela, 4 years at University of South Florida in Tampa-Florida [more]


Photo: Rafael B.

Rafael B.

AutoCAD Tutor

Augusta, GA 30909

Will travel 20 miles

$40 per hour.

0.0 0 ratings

View Rafael B.

CAD/BIM Instructor

I have an architecture drafting certificate from a college. I did at least 60 college hours in AutoCad training and have been using it since 2005. I am formally trained in AutoCAD and received my Architectural drafting certification in 2007. I went on to Architecture school and received my bachelors in 2013. I have been using AutoCAD since 2005 and Revit since 2012. I am self employed and do high end residential architecture. I am also capable of using Adobe Suite. I am self employed and have a pretty flexible schedule. I can usually accommodate hours without much notice.... [more]


Photo: Edem B.

Edem B.

AutoCAD Tutor

Simpsonville, SC 29680

Will travel 40 miles

$30 per hour.

5.0 7 ratings

View Edem B.

College and High School Math, Science and Engineering Tutor

I have an associate degree in engineering Graphics. I spent 2 years studying AutoCad, Catia and Solid works. My degree, work and education experience is available upon request. My name is Edem. I have a BS degree in Mechanical Engineering, an AS degree in Engineering Graphics. I have also successfully completed some graduate hours towards an MS in Mechanical Engineering at Clemson University. I am very laid back, I love sports (soccer), listening to different kinds of music and learning about different cultures from all over the world. Teaching is one of my many talents. I love teaching. I [more]



Photo: Jackie P.

Jackie P.

AutoCAD Tutor

Lavonia, GA 30553

Will travel 30 miles

$40 per hour.

4.0 7 ratings

View Jackie P.

Engineer - *Math*

I am a civil engineer. I have been trained in and worked using AutoCAD from R-12 to Civil 3-D 2008. I used AutoCAD on a daily basis for 7 years. I love math. I hold a Bachelor's degree in Civil Engineering from Clemson University. I am patient and have a way of explaining math (and other things) that enable students to understand and therefore master the math! I am also good with reading and writing. I have a knack with writing, from short stories, essays and term papers to technical writing skills. I was also a physical education major at James Madison University in years past. At J [more]


Photo: Sharri W.

Sharri W.

AutoCAD Tutor

Asheboro, NC 27205

Will travel 35 miles

$40 per hour.

0.0 0 ratings

View Sharri W.

AutoCAD Tutoring

I have been using AutoCAD for 15+ years. I have extensive design experience in various technologies. I have transitioned several companies using other CAD software to using AutoCAD. I set up and designed AutoCAD templates, provided blocks that allowed attribute extraction. I was in charge of teaching AutoCAD to the engineering groups. Over the course of my career I have continued this path and enjoy it. I have been using various CAD software's for 20+ years. I have taught both AutoCAD & SolidWorks. I have extensive design experience in various technologies. To me, drafting is art. [more]


Photo: Brian P.

Brian P.

AutoCAD Tutor

East Flat Rock, NC 28726

Will travel 35 miles

$35 per hour.

0.0 0 ratings

View Brian P.

Skilled CAD Specialist Offering 2D/3D Drafting Tutoring Services

I have four years of recent experience using AutoCAD and similar programs. I spent two years at Eaton Corporation in the Low Voltage Switch Gear department and two years as a junior engineer at Linamar NC. My expertise includes Auto Desk's Inventor 3D software. I'm a highly motivated engineer who specializes in 2D and 3D Computer Aided Drafting and it's related programs and processes. I have just over four years of recent experience in the manufacturing industry and nearly ten years spent in electrical engineering. Over my career I've become knowledgeable in quite a few areas including electri [more]


Photo: Kevin I.

Kevin I.

AutoCAD Tutor

Kings Mountain, NC 28086

Will travel 10 miles

$50 per hour.

0.0 0 ratings

View Kevin I.

25+ years AutoCAD, Solid Modeling (Inventor) and Computer Engineering

I have used AutoCAD for over 25 years in doing mechanical design. I have 12 years of engineering experience with industrial products. I have taught several levels of drafting including AutoCAD at high school and community college for the last eight years. My name is Kevin and I am available for tutoring in AutoCAD and Autodesk Inventor. I have used CAD and solid modeling for over twenty years including working as a design engineer with various electro-mechanical products and then teaching at both the high school and community college levels. I have taught many levels of drafting, including [more]


Photo: John W.

John W.

AutoCAD Tutor

Simpsonville, SC 29680

Will travel 20 miles

$30 per hour.

5.0 1 ratings

View John W.

Trigonometry and Calculus Tutor

I worked with Autocad 12 and Autocad 97 for several years while employed as a designer for industrial equipment. I'm familiar with paper/model space, layers, blocks, dimensioning and reference drawings. I periodically used isometric mode as necessary. Presently I have DraftSight (an Autocad clone) on my home computer. So you need help learning Algebra, Trig or Calculus! I guess the reason you're seeking help is not because you watch ?The Big Bang Theory? and have seen strange math equations that were written on their whiteboard, but rather, you are currently enrolled in a math course in [more]


Photo: Charles B.

Charles B.

AutoCAD Tutor

Columbia, SC 29212

Will travel 30 miles

$55 per hour.

3.67 3 ratings

View Charles B.

Engineer, Mathematician, & Physicist

I am a Registered Professional Engineer involved with foundation design and design of retaining walls using AutoCAD. I am a certified AutoCAD user and have produced many engineering drawings from manufactured products to land development design and supporting details using AutoCAD. My professional experience includes Senior Design Engineer/Principal where I provide civil/structural design, hydraulic design and drafting support for land development projects; conduct environmental site assessments/jurisdictional wetlands delineations; conduct asbestos inspections; analyze geotechnical condition [more]