15 AutoCAD Tutors Found Near Grand Rapids, MI



Photo: Latif I.

Latif I.

AutoCAD Tutor

Kalamazoo, MI 49009

Will travel 30 miles

$40 per hour.

5.0 4 ratings

View Latif I.

Experienced Mechanical Engineering Tutor

I have previous experience as a mechanical engineer employee. I used AutoCAD for buildings mechanical work design. I also taught AutoCAD class for college Mechanical Engineering students. AutoCAD is a powerful design tool for 2D drafting and 3D complete design. I have been teaching and tutoring math, science, and Mechanical Engineering for more than ten years. Currently, I am part time tutoring and teaching along with my Ph.D. work in Mechanical Engineering at Western Michigan University. I have ten years of experience as a graduate research and teaching assistant, including four years in the [more]


Photo: DeLantrea B.

DeLantrea B.

AutoCAD Tutor

Broadview, IL 60155

Will travel 25 miles

$50 per hour.

3.57 28 ratings

View DeLantrea B.

AutoCAD & Revit (Architecture) Tutor

I have used AutoCAD since I was trained in it in 1997. In 2006, I began teaching AutoCAD based classes at Westwood College. In 2008, I moved on to teaching AutoCAD based classes at ITT Technical Institute until it closed in September 2016. I have experience with providing lesson plans in the subject matter and would be happy to customize a lesson plan for you. I am an Architectural Designer with over 17 years experience in the Architectural Design and Services field where I use both AutoCAD and Revit (Architecture) software. I have used AutoCAD for over 20 years and Revit for 8 years. I bega [more]


Photo: Mel P.

Mel P.

AutoCAD Tutor

Evanston, IL 60202

Will travel 15 miles

$100 per hour.

3.22 9 ratings

View Mel P.

Architect and Certified Revit Training Specialist

I have used and taught AutoCAD since release 2.1 and started learning on 1.4, through 2014. in 1984 I developed and taught the AutoCAD courses at Illinois Technical College. After that I taught AutoCAD at Moraine Valley Community College, Triton College and Oakton Community College, along with many private engineering and design firms throughout the Chicagoland area from 1985 to 2012. I have been teaching AutoCAD for almost thirty years. I started teaching at Illinois Technical College where I was the head of the Drafting Department. I setup and started teaching Revit at Moraine Valley Comm [more]



Photo: Ryan B.

Ryan B.

AutoCAD Tutor

Waterford, MI 48329

Will travel 15 miles

$40 per hour.

0.0 0 ratings

View Ryan B.

Engineer Looking to aid students

I have been using AutoCAD and other CAD platforms for 10 years. I have been professionally trained on the subject through work and school. I have tutored students on the use of AutoCAD in the past, resulting in significantly better understanding and grades for the tutored students. I am an engineering student looking to aid students with coursework in my free time. I am currently a design engineer who has worked for two major automotive suppliers actively pursuing my degree in mechanical engineering. I started my education at Michigan Technological University, where I studied for 4 years and e [more]


Photo: Ricky D.

Ricky D.

AutoCAD Tutor

Milwaukee, WI 53204

Will travel 20 miles

$50 per hour.

0.0 0 ratings

View Ricky D.

Mechanical Engineer

I have a degree in mechanical engineering and used AutoCAD for many classes earning my associates degree in Mechanical Design from MATC. I have about 10 years of experience using AutoCAD in college and industry. I am a college graduate of The Milwaukee School of Engineering (MSOE) in Mechanical Engineering Technology and an Associates degree from Milwaukee Area Technical College (MATC) in Mechanical Design. While earning these degrees I can tell you how valuable tutoring is. Usually taking notes in class isn't enough and extra help is needed. I found that getting help from peers makes all the [more]


Photo: Jeanette L.

Jeanette L.

AutoCAD Tutor

Saugatuck, MI 49453

Will travel 15 miles

$40 per hour.

0.0 0 ratings

View Jeanette L.

certified art teacher and professional working artist available

I worked in the manufacturing industry for a few years, then I taught AutoCAD (mechanical engineering design) for three semesters in an adult education school. I left off at version 14. DO NOT know 3D at all. I am a certified art teacher with a Masters degree in Humanities from Central Michigan University. I also have a BA in Art Ed and two associates degrees in Auto design and Manufacturing design. I have been teaching in k-12 schools (and adult as well as college) since 1986, and have been subbing in k-12 since 2009, in all subjects and grades. I have also taught at an art camp for three y [more]


Photo: Thomas G.

Thomas G.

AutoCAD Tutor

Tecumseh, MI 49286

Will travel 36 miles

$36 per hour.

0.0 0 ratings

View Thomas G.

Autocad or any CAD, 3-D CAD, Computers and Grade School Math

Have 24 years experience in the CAD field working with AutoCAD, AutoDesk Inventor and Nx software. Most recently was long term sub-teacher for the CAD teacher at Monroe High School. From Feb 3, 2015 to June 5, 2015. Were I taught Intro to CAD to advance 3-D modeling and Architecture. Currently run my own small CAD service were I provide customers with CAD services. From 3-D model creation to design of custom homes. Have design a 2000 sq ft doctor office and over seen the entire project. I have been using various CAD programs and solid modeling programs for the past twenty-eight years, includin [more]


Photo: Stephen B.

Stephen B.

AutoCAD Tutor

Mishawaka, IN 46544

Will travel 20 miles

$40 per hour.

5.0 2 ratings

View Stephen B.

3D CAD and Revit Guru

I have an Associates degree in Architectural Engineering, which was the basis for the drafting work leading up to my extensive work in AutoCAD. I have been using AutoCAD in a professional environment for over 20 years in various industries while working for architects, engineers, and contractors. I have trained many people in AutoCAD, both on my own and as part of my different jobs. I have kept up with the field by participating in frequent continuing education in classes and seminars. I have over 20 years of hands-on experience in the CAD and the construction industry. I have also been teachi [more]


Photo: Simon C.

Simon C.

AutoCAD Tutor

Hastings, MI 49058

Will travel 40 miles

$35 per hour.

0.0 0 ratings

View Simon C.

Army Officer w/bachelors in graphics and design

I graduated Western Michigan University with a Bachelors of Science in Engineering Graphics and Design. We studied numerous cad programs such as AutoCAD, Pro-E, IDEAS, CATIA. I own my own copy of AutoCAD since 2002 and have been actively using the software in not only at my job, but personally as well. I'm an Army National Guard Officer approaching 15 years of service with a combat tour in Iraq and Afghanistan. I've trained and taught numerous Soldiers at all levels of experience and capability. Each one learned in a different way which made the experience that much more challenging and rew [more]


Photo: Darius H.

Darius H.

AutoCAD Tutor

Romulus, MI 48174

Will travel 40 miles

$35 per hour.

5.0 3 ratings

View Darius H.

Architecture, Physics, Algebra, Geometry, Pre Calculus

I have a bachelor's in Architectural Design and currently have one semester left for my Master's. We use AutoCAD everyday. I also have a certificate for Architectural Technology from Washtenaw Community College and the Bachelor of Science in Architecture is from Lawrence Technological University. Hi my name is Darius. I am a resident of Romulus Mi, originally from Canton MI. I am a Masters of Architecture student at Lawrence Technological university. I have a very advanced education, one which has allowed me to take advanced studies in Math, Physics, reading and writing. Although I am new to t [more]