11 AutoCAD Tutors Found Near Rockford, IL



Photo: DeLantrea B.

DeLantrea B.

AutoCAD Tutor

Broadview, IL 60155

Will travel 25 miles

$50 per hour.

3.57 28 ratings

View DeLantrea B.

AutoCAD & Revit (Architecture) Tutor

I have used AutoCAD since I was trained in it in 1997. In 2006, I began teaching AutoCAD based classes at Westwood College. In 2008, I moved on to teaching AutoCAD based classes at ITT Technical Institute until it closed in September 2016. I have experience with providing lesson plans in the subject matter and would be happy to customize a lesson plan for you. I am an Architectural Designer with over 17 years experience in the Architectural Design and Services field where I use both AutoCAD and Revit (Architecture) software. I have used AutoCAD for over 20 years and Revit for 8 years. I bega [more]


Photo: Mel P.

Mel P.

AutoCAD Tutor

Evanston, IL 60202

Will travel 15 miles

$100 per hour.

3.0 8 ratings

View Mel P.

Architect and Certified Revit Training Specialist

I have used and taught AutoCAD since release 2.1 and started learning on 1.4, through 2014. in 1984 I developed and taught the AutoCAD courses at Illinois Technical College. After that I taught AutoCAD at Moraine Valley Community College, Triton College and Oakton Community College, along with many private engineering and design firms throughout the Chicagoland area from 1985 to 2012. I have been teaching AutoCAD for almost thirty years. I started teaching at Illinois Technical College where I was the head of the Drafting Department. I setup and started teaching Revit at Moraine Valley Comm [more]


Photo: Ricky D.

Ricky D.

AutoCAD Tutor

Milwaukee, WI 53204

Will travel 20 miles

$50 per hour.

0.0 0 ratings

View Ricky D.

Mechanical Engineer

I have a degree in mechanical engineering and used AutoCAD for many classes earning my associates degree in Mechanical Design from MATC. I have about 10 years of experience using AutoCAD in college and industry. I am a college graduate of The Milwaukee School of Engineering (MSOE) in Mechanical Engineering Technology and an Associates degree from Milwaukee Area Technical College (MATC) in Mechanical Design. While earning these degrees I can tell you how valuable tutoring is. Usually taking notes in class isn't enough and extra help is needed. I found that getting help from peers makes all the [more]



Photo: Maria D.

Maria D.

AutoCAD Tutor

Westmont, IL 60559

Will travel 20 miles

$45 per hour.

0.0 0 ratings

View Maria D.

A Multi-Faceted Tutor: Design, Drawing, Computers

I have worked in AutoCAD since i started my degree at Harrington College of Design in 2006. I have worked in the exhibit industry for 7 years doing construction and setup drawings for project managers and shop guys to build the exhibit off my drawings. This included setup print, detail drawings, and drawings to send to vendors to build specific elements that we could not make in house. I have also worked for an architect for 5 years doing tenant revisions. This included creating Demo/Existing plans, Reflected ceiling plans, Electrical plans and Elevations. Working and gaining experience over [more]


Photo: Michael L.

Michael L.

AutoCAD Tutor

Batavia, IL 60510

Will travel 30 miles

$50 per hour.

0.0 0 ratings

View Michael L.

AutoCAD Tutor for daytime lessons

I have an associate?s degree in AutoCAD. I worked for an engineering firm designing electrical infrastructure. I worked there for 5 years and the majority of my designs were in AutoCAD. I also worked on structural designs in AutoCAD. I have a degree in AutoCAD and Drafting from Robert Morris College. After graduation I went to work at an engineering firm in the western suburbs of Chicago. I worked there and and attained the level of Drafter III prior to leaving to commit myself to starting a new company. I have started an aerial photography business but have days off due to weather. W [more]


Photo: Stephen B.

Stephen B.

AutoCAD Tutor

Wood Dale, IL 60191

Will travel 40 miles

$50 per hour.

0.0 0 ratings

View Stephen B.

Mechanical Engineer Tutor

Currently I have about 4 years of design experience. I have worked as a Design Engineer for a little over 2 1/2 years now in industrial applications. Also I worked as a Solidworks Designer for about 1 1/2 years designing custom radiators. I have a Bachelor of Science in Aerospace Engineering and a Master of Science in Engineering-Manufacturing and Design. I recently graduated with my Masters in June 2016 with a GPA of 3.54. I have about 3 months experience as a teaching assistant for a course called, "Intro to Solidworks". Currently I have about 4 years of design experience. I have worke [more]


Photo: Stefano L.

Stefano L.

AutoCAD Tutor

Milwaukee, WI 53210

Will travel 25 miles

$40 per hour.

4.0 2 ratings

View Stefano L.

Experienced English and Italian tutor, interpreter and translator.

I am a University of Milwaukee ? Wisconsin graduate with a Bachelor of Arts and a Masters Degree in Architecture and I spent the last 13 years working in the architecture field. I am an expert user of AutoCAD and other related software. I taught Introduction to CAD with emphasis on architectural design and drawing production at Milwaukee Institute of Art and Design (MIAD). Hello, my name is Stefano. I am a native Italian speaker who moved to Milwaukee in 1989. My educational background includes a Bachelor of Science and a Master of Architecture from the University of Wisconsin - Milwaukee and [more]


Photo: Tyler L.

Tyler L.

AutoCAD Tutor

Milwaukee, WI 53213

Will travel 7 miles

$35 per hour.

4.94 16 ratings

View Tyler L.

Mechanical Engineer looking to help people learn

Worked for a large industrial engine supplier near Chicago, IL for two years. While working there I designed and modeled well over 200 parts and at least 75 went into production. All of my work was done on Solidworks. I currently work as a Mechanical Engineer for Briggs and Stratton in Wauwatosa and have been since August of 2016. I graduated from the Milwaukee School of Engineering in 2014 with a B.S in Mechanical Engineering and a minor in Business Management. While I was a student at at MSOE I was on the Deans List for every trimester (except for my first trimester as a freshman). I ha [more]


Photo: Lisa H.

Lisa H.

AutoCAD Tutor

Westchester, IL 60154

Will travel 30 miles

$55 per hour.

5.0 3 ratings

View Lisa H.

I am an interior designer/educator/master's/a mother

I am qualified to teach AutoCAD because I have been working with it for years. I took AutoCAD classes to receive my Bachelor's degree. Then I worked in the field for years using AutoCAD at my various jobs. Then I taught AutoCAD in the western suburbs for years. Recently, I used my AutoCAD skills to complete my Master's. I love AutoCAD. While I taught at the college level: ?I continually received a 95% approval rating from my students ?I developed student curriculum and maintain student records I taught the following courses: Studio 1, ID Comm./SketchUp, Interior Design Principles, Space Pla [more]


Photo: Anthony R.

Anthony R.

AutoCAD Tutor

Arlington Heights, IL 60005

Will travel 25 miles

$60 per hour.

4.85 105 ratings

View Anthony R.

Strong math, science, and engineering proficiency

I have used the AutoCAD and its family of programs (Inventor, VIZ Render, etc.) for all four years of college and three years in high school. I have done many projects with it including 3D printing and the architectural design of a nuclear reactor. I graduated from the University of Illinois Champaign-Urbana with a 3.42 GPA in nuclear engineering. While still in college I had the opportunity to tutor quite a few people in Chemistry, Physics, Math, and Engineering Classes. While these subjects are my main strengths I am also available in other subjects such as History, English, and Biology. My [more]