10 AutoCAD Tutors Found Near Springfield, IL



Photo: DeLantrea B.

DeLantrea B.

AutoCAD Tutor

Broadview, IL 60155

Will travel 25 miles

$50 per hour.

3.57 28 ratings

View DeLantrea B.

AutoCAD & Revit (Architecture) Tutor

I have used AutoCAD since I was trained in it in 1997. In 2006, I began teaching AutoCAD based classes at Westwood College. In 2008, I moved on to teaching AutoCAD based classes at ITT Technical Institute until it closed in September 2016. I have experience with providing lesson plans in the subject matter and would be happy to customize a lesson plan for you. I am an Architectural Designer with over 17 years experience in the Architectural Design and Services field where I use both AutoCAD and Revit (Architecture) software. I have used AutoCAD for over 20 years and Revit for 8 years. I bega [more]


Photo: Mel P.

Mel P.

AutoCAD Tutor

Evanston, IL 60202

Will travel 15 miles

$100 per hour.

3.22 9 ratings

View Mel P.

Architect and Certified Revit Training Specialist

I have used and taught AutoCAD since release 2.1 and started learning on 1.4, through 2014. in 1984 I developed and taught the AutoCAD courses at Illinois Technical College. After that I taught AutoCAD at Moraine Valley Community College, Triton College and Oakton Community College, along with many private engineering and design firms throughout the Chicagoland area from 1985 to 2012. I have been teaching AutoCAD for almost thirty years. I started teaching at Illinois Technical College where I was the head of the Drafting Department. I setup and started teaching Revit at Moraine Valley Comm [more]


Photo: Maria D.

Maria D.

AutoCAD Tutor

Westmont, IL 60559

Will travel 20 miles

$45 per hour.

0.0 0 ratings

View Maria D.

A Multi-Faceted Tutor: Design, Drawing, Computers

I have worked in AutoCAD since i started my degree at Harrington College of Design in 2006. I have worked in the exhibit industry for 7 years doing construction and setup drawings for project managers and shop guys to build the exhibit off my drawings. This included setup print, detail drawings, and drawings to send to vendors to build specific elements that we could not make in house. I have also worked for an architect for 5 years doing tenant revisions. This included creating Demo/Existing plans, Reflected ceiling plans, Electrical plans and Elevations. Working and gaining experience over [more]



Photo: Eric H.

Eric H.

AutoCAD Tutor

Casey, IL 62420

Will travel 40 miles

$45 per hour.

0.0 0 ratings

View Eric H.

Autocad Drafter with over 10 years experience

I have an associates degree in Autocad. I have worked as a draftsman for 10 years. I have experience in the newest release of Autocad. I have experience in teaching people to draw in 2d AutoCAD. I have trained many people at my job, from those with no CAD experience to some with experience. I can teach the parts of drafting that are used in industry. I also have the ability to teach those who need help in math and algebra. I excelled in math in high school and college and truly enjoy teaching others who need assistance. I have used algebra in my everyday job and have a vast kno [more]


Photo: Michael L.

Michael L.

AutoCAD Tutor

Batavia, IL 60510

Will travel 30 miles

$50 per hour.

0.0 0 ratings

View Michael L.

AutoCAD Tutor for daytime lessons

I have an associate?s degree in AutoCAD. I worked for an engineering firm designing electrical infrastructure. I worked there for 5 years and the majority of my designs were in AutoCAD. I also worked on structural designs in AutoCAD. I have a degree in AutoCAD and Drafting from Robert Morris College. After graduation I went to work at an engineering firm in the western suburbs of Chicago. I worked there and and attained the level of Drafter III prior to leaving to commit myself to starting a new company. I have started an aerial photography business but have days off due to weather. W [more]


Photo: Jonathan D. C.

Jonathan D. C.

AutoCAD Tutor

West Lafayette, IN 47906

Will travel 30 miles

$75 per hour.

0.0 0 ratings

View Jonathan D. C.

Jonathan D. | CAD & Graphics Tutor

I am an AutoCAD 2013 Certified Professional user. My AutoCAD 2013 ACP number was obtained in February 2014. I have also been teaching AutoCAD in both 2D and 3D for over 13 years. I have attended Autodesk University where I sat in on a variety of classes as well. My degree from Purdue University was where I first used AutoCAD in 1989-1994. I worked in industry using AutoCAD for over 8 years. I have been in the academia environment for over 13 years instructing courses in the area of Technology to college level students. In the mix of teaching I have also tutored industry level persons in the a [more]


Photo: Stephen B.

Stephen B.

AutoCAD Tutor

Wood Dale, IL 60191

Will travel 40 miles

$50 per hour.

0.0 0 ratings

View Stephen B.

Mechanical Engineer Tutor

Currently I have about 4 years of design experience. I have worked as a Design Engineer for a little over 2 1/2 years now in industrial applications. Also I worked as a Solidworks Designer for about 1 1/2 years designing custom radiators. I have a Bachelor of Science in Aerospace Engineering and a Master of Science in Engineering-Manufacturing and Design. I recently graduated with my Masters in June 2016 with a GPA of 3.54. I have about 3 months experience as a teaching assistant for a course called, "Intro to Solidworks". Currently I have about 4 years of design experience. I have worke [more]


Photo: Anthony R.

Anthony R.

AutoCAD Tutor

Arlington Heights, IL 60005

Will travel 25 miles

$60 per hour.

4.85 105 ratings

View Anthony R.

Strong math, science, and engineering proficiency

I have used the AutoCAD and its family of programs (Inventor, VIZ Render, etc.) for all four years of college and three years in high school. I have done many projects with it including 3D printing and the architectural design of a nuclear reactor. I graduated from the University of Illinois Champaign-Urbana with a 3.42 GPA in nuclear engineering. While still in college I had the opportunity to tutor quite a few people in Chemistry, Physics, Math, and Engineering Classes. While these subjects are my main strengths I am also available in other subjects such as History, English, and Biology. My [more]


Photo: Lisa H.

Lisa H.

AutoCAD Tutor

Westchester, IL 60154

Will travel 30 miles

$55 per hour.

5.0 3 ratings

View Lisa H.

I am an interior designer/educator/master's/a mother

I am qualified to teach AutoCAD because I have been working with it for years. I took AutoCAD classes to receive my Bachelor's degree. Then I worked in the field for years using AutoCAD at my various jobs. Then I taught AutoCAD in the western suburbs for years. Recently, I used my AutoCAD skills to complete my Master's. I love AutoCAD. While I taught at the college level: ?I continually received a 95% approval rating from my students ?I developed student curriculum and maintain student records I taught the following courses: Studio 1, ID Comm./SketchUp, Interior Design Principles, Space Pla [more]


Photo: Muhammad R.

Muhammad R.

AutoCAD Tutor

Gurnee, IL 60031

Will travel 40 miles

$50 per hour.

4.81 64 ratings

View Muhammad R.

Knowledgeable and Reliable with PhD and MBA and vast experience

I have 10+ years of experience in AutoCAD through professional work as Mechanical Engineer for various organizations. I have taught AutoCAD at ITT Technical Institute, Mt Prospect IL in the past. I believe I could help you learn AutoCAD professionally as I have direct experience in using this software as well as teaching it to students for several years. My teaching philosophy is to explain the content, give enough practice problems and quiz the student to reinforce key concepts. I believe in open communication and build confidence in student to ask questions as many time as he/she wishes. I n [more]