16 Electrical Engineering Tutors Found Near Roanoke, VA



Photo: Danilo R.

Danilo R.

Electrical Engineering Tutor

Gaithersburg, MD 20878

Will travel 25 miles

$75 per hour.

4.93 1221 ratings

View Danilo R.

Math-Physics-Engineering Tutor

I am an instructor in Electrical Engineering. I taught courses on circuit theory, digital electronics, semiconductor device physics, electrostatics, magnetostatics, and electromagnetic wave propagation. I have Bachelor of Science degrees in Physics and Electrical Engineering and PhD in Physics. I have more than 10 years of experience in teaching math, physics, and engineering courses to science and non-science students at UMCP, Virginia Tech, and in Switzerland. I am a dedicated teacher and I always took the extra effort to spend time with students outside regular class hours to help them le [more]


Photo: Rashonda J.

Rashonda J.

Electrical Engineering Tutor

Laurel, MD 20724

Will travel 20 miles

$50 per hour.

4.93 188 ratings

View Rashonda J.

Math & Science Tutor

I have a master's degree from Johns Hopkins University in Electrical and Computer Engineering. *I AM NOT ACCEPTING ANY NEW STUDENTS AT THIS TIME. PLEASE CHECK BACK TO GET ANY UPDATES TO THIS BANNER. THANKS* I am an Electronics Engineer that loves to teach and tutor. I have over 20 years of tutoring experience. I started tutoring elementary math while I was in high school. After graduating high school, I continued to tutor high school students in my community. After I obtained my bachelor's degree from Louisiana State University, I became a G.E.D. teacher for the school board for 2 ... [more]


Photo: Seyed Kaveh M.

Seyed Kaveh M.

Electrical Engineering Tutor

Chevy Chase, MD 20815

Will travel 10 miles

$60 per hour.

4.94 345 ratings

View Seyed Kaveh M.

Math Tutor: Pre-Algebra to Calculus

I have a BS degree in Electrical Engineering from George Mason University. I have passed a lot of courses in electronics and signals and systems. I have tutored students in signals and systems (e.g. finding the transfer function, unit step response, etc) and fundamentals of electric circuits (finding the Thevinin and Norton equivalent circuit, solving first and second order linear circuits, etc). I am an experienced math tutor who has worked at George Mason University Math Learning Center for about three years, where I tutored students in variety of math courses such as algebra, probability, a [more]


Photo: Barbara W.

Barbara W.

Electrical Engineering Tutor

Williamsburg, VA 23188

Will travel 25 miles

$65 per hour.

4.73 11 ratings

View Barbara W.

Law & Business Tutor

I graduated from MIT with a degree in Electrical Engineering. I received a Bachelor of Science degree from Massachusetts Institute of Technology in May, 1976. Technical assignments from 1976 through 1991 involved the development of high speed digital image processing products as well as associated network services product offerings. I would very much like to help anyone who is interested in performing their very best in my trained areas of law, business and/or engineering. Many years ago, I graduated from MIT with a degree in Electrical Engineering. For fifteen years I worked in the field [more]


Photo: Brian P.

Brian P.

Electrical Engineering Tutor

East Flat Rock, NC 28726

Will travel 35 miles

$35 per hour.

0.0 0 ratings

View Brian P.

Skilled CAD Specialist Offering 2D/3D Drafting Tutoring Services

On May 7th 2014 I was presented with an Associates In Applied Science degree in Electronics Engineering Technology from Caldwell Community College and Technical Institute. I'm a highly motivated engineer who specializes in 2D and 3D Computer Aided Drafting and it's related programs and processes. I have just over four years of recent experience in the manufacturing industry and nearly ten years spent in electrical engineering. Over my career I've become knowledgeable in quite a few areas including electrical design, manufacturing processes, machining, and 3D printing principles. Both in my [more]


Photo: Kody G.

Kody G.

Electrical Engineering Tutor

Raleigh, NC 27604

Will travel 10 miles

$40 per hour.

4.91 116 ratings

View Kody G.

Experienced, qualified tutor for STEM, test prep, writing, etc.

As a mechanical engineering major, I have a good understanding of the basics of circuit theory and received an A+ in my own circuit theory class (class average was in the low 60s). Topics I can help you with include, but are not limited to: Ohm's Law, Kirchoff's Rules, basic circuit elements, capacitors, inductors, stead-state and transient analysis, phasors, RC circuits, RLC circuits, DC vs AC analysis, etc. Hello students and parents! My name is Kody and although I specialize in Science, Technology, Engineering, and Mathematics (STEM) tutoring, I am well versed in and capable of tutoring a [more]


Photo: Donnita M.

Donnita M.

Electrical Engineering Tutor

White Plains, MD 20695

Will travel 15 miles

$40 per hour.

5.0 4 ratings

View Donnita M.

Engineering professional offering tutoring services.

I hold a B.S. in Optical Engineering and a M.S. in Electronics Engineering. In the duration of my studies, I have excelled in my circuits, signals, systems, electromagnetics, and various other courses. My concentration in graduate school was electro-optical communications. I am a native of Prince George's Country, Maryland. I graduated from Largo High School in 2009 and went on to pursue an Optical Engineering degree at Norfolk State University. After graduating in 2014, I stayed in the area and went on to begin my graduate education in Electronics Engineering, also at Norfolk State University [more]


Photo: Brad M.

Brad M.

Electrical Engineering Tutor

Blacksburg, VA 24060

Will travel 40 miles

$40 per hour.

4.89 264 ratings

View Brad M.

Math, Physics, ME, EE, Econ, Accounting, Finance, and Proofreading

What makes the ME an "Electro-Mechanical" Engineer? Building your OWN measurement-and-control circuits. I'd be most helpful working with low-voltage DC signals and layouts. Biomedical instruments face the special challenge of sensing microvolt signals in noisy settings. Recent courses have included VT ECE 2004,54. One key circuit analysis concept is this: parallel paths should use the node-current formulations of i = V/R, C dV/dt, 1/L ] V dt. For serial elements, the familiar voltage-loop approach works just fine using V = iR, L di/dt, 1/C ] i dt. Most devices can be viewed simply as "quasi-r [more]


Photo: Ken K.

Ken K.

Electrical Engineering Tutor

Manassas, VA 20110

Will travel 5 miles

$60 per hour.

4.96 118 ratings

View Ken K.

Intuitive style! Calculus/Analog Electronics/Signal Processing

I have 40 years of experience working in the Electrical Engineering field for major electronics industry corporations: IBM, Loral Federal Systems, Lockheed Martin, and BAE Systems. My major focus has always been on precision analog circuit design, Phase-Locked Loops, and analog IC design; I have a moderate amount of experience in RF design and GHz signal integrity. I have had frequent opportunities bringing new employees up to speed, teaching them how to do circuit design in these areas. I have a Bachelor of Science degree in Electrical Engineering from Carnegie-Mellon University (1974), a Ma [more]


Photo: John W.

John W.

Electrical Engineering Tutor

Simpsonville, SC 29680

Will travel 20 miles

$30 per hour.

4.5 2 ratings

View John W.

Trigonometry and Calculus Tutor

I graduated from DeVry University in 1997 with an ASEET. I graduated with a 4.0 GPA. I took courses such as Digital Systems, Op-amps, Microprocessor, in addition to standard fare such as Electronics I and II and AC theory. I worked as an electronic technician, repairing circuit boards returned by the customers. The repaired boards were certified to NIST standards prior to returning to the customer. So you need help learning Algebra, Trig or Calculus! I guess the reason you're seeking help is not because you watch ?The Big Bang Theory? and have seen strange math equations that were wri [more]